YYDR Electric Thermal Oil Boiler
YYDR series electric thermal oil boiler uses electric heating elements immersed directly in thermal oil to raise the oil temperature up to 350°C, while operating at near-atmospheric pressure. No burner, no flue, no fuel tank – just clean, silent, and controllable heat for industrial processes such as reactor heating, plastic pressing, drying ovens, and food processing. Ideal for factories with strict environmental requirements or where fuel delivery is difficult.
| Model | YYDR-36 | YYDR-72 | YYDR-120 | YYDR-180 | YYDR-240 | YYDR-360 | YYDR-480 | YYDR-600 |
|---|---|---|---|---|---|---|---|---|
| Rated thermal power (kW) | 36 | 72 | 120 | 180 | 240 | 360 | 480 | 600 |
| Design pressure(℃) | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 |
| Rated oil outlet temperature(℃) | 310 | 310 | 310 | 310 | 310 | 310 | 310 | 310 |
| Body oil storage(m³) | 0.03 | 0.08 | 0.1 | 0.14 | 0.21 | 0.35 | 0.4 | 0.48 |
| Thermal efficiency(%) | 98 | 98 | 98 | 98 | 98 | 98 | 98 | 98 |
| Supply voltage(V) | 380 | 380 | 380 | 380 | 380 | 380 | 380 | 380 |
| Oil pump power(KW) | 2.2 | 2.2 | 2.2 | 4 | 5.5 | 7.5 | 11 | 15 |
| Output pipe diameter(DN) | 25 | 40 | 40 | 65 | 65 | 80 | 80 | 80 |
| Transport weight(T) | 450 | 600 | 720 | 1100 | 1300 | 1900 | 2500 | 3200 |
| Length(mm) | 1400 | 1600 | 1700 | 1800 | 2650 | 3200 | 3950 | 4270 |
| Width(mm) | 600 | 700 | 1100 | 1250 | 1420 | 1600 | 1650 | 1800 |
| Height(mm) | 1100 | 1200 | 1400 | 1820 | 2040 | 2100 | 2300 | 2500 |
- Zero emissions: No flue gas, no CO₂, no smoke, no odour – pure electric heat. Perfect for clean rooms, indoor installations, and environmentally sensitive areas.
- High temperature at low pressure: Delivers up to 350°C at pressure <0.8 MPa. Much safer and simpler than high-pressure steam boilers. No boiler license required in many regions.
- High efficiency (≥98%): Almost all electrical energy converts directly into heat. No flue loss, no thermal radiation waste – the most efficient heating method available.
- No fuel logistics: No diesel tank, no gas pipe, no biomass storage – just electricity. Simple, safe, and clean.
- Fast response: Heating elements respond instantly. Achieve set temperature from cold start in minutes – no long preheating cycles.
- Chemical and pharmaceutical reactors
- Plastic injection molding and extrusion
- Rubber presses and vulcanization
- Food processing (frying, baking, drying)
- Wood drying and veneer presses
- Laminating and composite material curing
- Asphalt and bitumen heating
- Laboratory and pilot plant heating
- Textile drying and finishing
- Packaging machinery (sealing bars, hot melt units)
Our Mission Is To Offer High Quality Good Service Fast Delivery To Help Our Clients To Gain More Profits