The Three Main Safety Fittings for Steam Boilers
2020/09/30
The main safety accessories on a steam boiler consist of three types: the pressure gauge, the safety valve, and the water level gauge (or water gauge). Since these three accessories assist the boiler operator in rigorously monitoring and controlling the water level, and are directly tied to the safe operation of the boiler, they are known as the "three major safety fittings" of the boiler.
The pressure gauge is used to measure the internal pressure of the boiler during operation. With the pressure gauge, operators can correctly control the boiler and ensure its safe operation.
- Each boiler must be equipped with a pressure gauge directly connected to the steam space of the drum.
- Boilers with different working pressures require pressure gauges of different accuracy classes.
- The appropriate pressure gauge shall be selected according to the boiler's working pressure.
- The installation position should facilitate observation and blowdown cleaning, and should be protected from radiant heat and vibration.
- A three-way cock and a siphon (pigtail) pipe shall be installed below the pressure gauge.
- Installation, inspection, and maintenance shall comply with the regulations of the national metrological authority. The gauge shall be calibrated at least once every six months, and shall be lead‑sealed after calibration.
The safety valve automatically prevents the steam pressure in the boiler from exceeding the predetermined allowable range, thereby ensuring safe boiler operation.
When the internal pressure reaches the set limit, the safety valve automatically opens, releases steam, and gives an audible warning to alert the operator to take corrective action. After opening, the valve discharges sufficient steam to reduce the boiler pressure until it drops to a certain point lower than the opening pressure, at which the valve automatically closes. In this way, the boiler pressure is maintained within the safety limit and an explosion accident is prevented.
The water level gauge is an important safety device used to monitor the water level inside the drum. The level shown on the gauge indicates the actual water level in the boiler drum. The boiler operator relies on it for correct operation to ensure safe boiler operation.
- The number of water level gauges installed on each boiler shall strictly comply with the design drawings.
- The gauge shall be installed in a location that is easy to observe.
- The water level gauge shall have clear markings indicating the maximum safe water level, the minimum safe water level, and the normal water level.
- The connecting pipes shall be as short as possible and should be arranged horizontally to prevent false water level readings.