Boiler Descaling – Common Approaches
2021/09/14
After prolonged use, boilers tend to accumulate scale. Once scale has formed in the boiler, it must be removed promptly to prevent potential accidents. The commonly used descaling methods for boilers currently include: mechanical descaling, acid cleaning (chemical descaling), and alkaline boiling (alkali descaling).
-
Mechanical Descaling:
When loose scale and sludge are present in a cast iron hot water boiler, after shutdown, allow the boiler to cool, drain the boiler water, and rinse with clean water. Then, descaling can be performed using flat chisels, wire brushes, and motorized tube reamers.
This method is relatively simple and is mostly used for small cast iron hot water boilers with simple scale deposits. However, it involves high labor intensity, has poor descaling effectiveness, and may easily damage the boiler body.
-
Acid Cleaning (Chemical Descaling):
Acid cleaning is mostly carried out using hydrochloric acid or nitric acid. The cleaning solution consists of hydrochloric acid plus a corrosion inhibitor, or nitric acid plus a corrosion inhibitor.
This acid solution can effectively remove scale from the boiler (with the addition of hydrofluoric acid for nitrate‑based scale) while causing virtually no corrosion to the cast iron hot water boiler. Acid cleaning works through dissolution, peeling, and loosening actions on the scale.
-
Alkaline Boiling (Alkali Descaling):
The descaling effect of alkaline boiling is generally inferior to that of acid cleaning. However, after alkaline treatment, the scale becomes loosened. Therefore, for scale that is difficult to remove with hydrochloric acid, alkaline boiling can be used as a pretreatment step before acid cleaning.
Alkaline boiling is simple to operate and has relatively few side effects. Its disadvantages are that it requires a long boiling time, consumes a large amount of chemicals, and has limited effectiveness.